Even though you have completed the settings in the AdMob plugin, some people may have a hard time not seeing ads in the app right away.

Please check once more the contents announced in Swing2App.

The order in which the manual guides you is not relevant. Please check all the contents.

1. Check whether the ad ID and app ID are correctly entered in the AdMob plugin.

The simplest and most important!

On the Swing2App AdMob plugin setting screen, enter the ad unit ID and app ID you created.

In some cases, the front and banner ad unit IDs are changed and entered, and the ad unit ID is incorrectly entered in the place where the app ID is placed.

Therefore, please check once more that the ad unit ID and app ID are correctly entered!

Since you need to create separate ad unit IDs for Android and iPhone, make sure that the two are not mixed.

And if you have completed setting up the AdMob plugin for the first time, be sure to click the [Request for app creation] button to update the app to the new version! You have to do it.

Please refer to the manual below for how to use Swing2App AdMob plugin settings!

☞Go to see how to use AdMob plugin settings

2. It may take up to a week or more to send advertisements.

*This is the most representative case in which the advertisement is not displayed immediately. (General case)

Advertising transmission refers to distributing advertisements by checking the user’s AdMob account and connected apps in Google.

It is not judged, but because it is a fixed stage, it takes a normal time for advertisements to be distributed in the app due to such transmission.

However, there are variations because there are cases in which the transmission is completed immediately and advertisements are shown in the app.

If you create a new Google AdMob account or create a new App ID, it may take longer than usual.

Ads are sent out normally and may take an average of over a week, so please be patient.

3. Have you finished entering’Payment Profile’ in the AdMob dashboard?

This is for those who are new to AdMob, that is, those who have signed up for AdMob for the first time.

After creating an account in AdMob, you need to complete the payment profile to receive the advertising revenue.

If the payment profile is not entered, it will not be reflected even if you create an advertisement ID and set it in the app.

Therefore, those who signed up for the first time must be *Please make sure you have entered your payment profile in the AdMob dashboard.

-Account approval has been completed and ad serving has been enabled-to be completed!

4. Ad Review – Have you checked all unreviewed, blocked ads?

You need to make sure there are no unreviewed ads in the block management in your AdMob dashboard.

From the category on the left side of the AdMob dashboard, select Block Management → [Go to Ad Review Center].

1) Priority reviewed ads

(1)If you select [Priority reviewed ads], you will see ads that have not yet been reviewed, as in the image above. 

(2)You should change the status to ‘Reviewed’ by selecting the [Mark all as reviewed] button.

☞ [Go to the Swing2App AdMob Operation Notes]

5. Please check if there is any violation of the fraudulent click or invalid traffic policy.

Please check if there is any violation of the fraudulent click or invalid traffic policy.

All illegal fraudulent click traffic is a violation of policy due to artificially clicking a lot of AdMob ads.

Of course, those who create and use AdMob advertisements for the first time do not have such violations because the advertisement itself has not been created yet.

If the ad ID applied to another app within the AdMob account is suspended due to policy violation, the account may also be suspended.

Not only the ad unit ID is suspended, but in some cases even the AdMob account is suspended.

Therefore, please check whether there is any policy violation.

Usually, in case of a violation of this policy, no other action can be taken, the only way to do this is to wait for Google to approve it again.

It may take some time as it may take an average of 1 to 2 weeks or more.

In addition, please check your email and AdMob dashboard for any other violations of AdMob policies.

*In case of suspension due to policy violation, you must wait until the suspension is resolved.

6. Check AdMob test ads

*This method is for users to check whether there is a problem with the app created by Swing2App or with the AdMob server provided by Swing2App.

By applying the test ID in the AdMob plugin, you can check if the AdMob ad for test appears in the app.

[How to set up AdMob advertisement for testing]

You can see the front and banner ads for testing in the app.

If the ad for AdMob test ads appear well in the app, there is no problem with the app created by Swing2App or the Swing2App server itself.

In general, it may take the usual time for the ad to be distributed to the app due to the ad sending time.

The AdMob plugin settings provided by Swing2App are available only by purchasing the ‘AdMob Application Plugin ($220)’ product of Swing2App.

For how to set up AdMob advertisements, please refer to  ☞See How to use AdMob plugin settings. 

How to set up AdMob plugin ads

You can create an ad-profit app by applying Google AdMob advertisement to an app produced by Swing2App.

After purchasing Google’s AdMob plug-in product provided by Swing2App, you can connect the advertisement directly to the app by entering the information needed to set up the ad mob.

We will guide you through the AdMob setting to the store launch process, so if you want to set up AdMob advertising, please refer to the manual before proceeding.

1. App Production Completed

Please complete the application before applying the ad-mob advertisement.

*You don’t have to create 100% complete apps!

If you want to test the advertisement setting first, you can proceed after making some.

The app can be modified and updated continuously in the future, so even if you apply the advertisement, it can be used continuously.

2. Purchase AdMob plug-in products or package products

1) Purchase plug-in products with Google AdMob (single product)

*Manager → Online Stores → Swing2App Plug-ins Please pay $220 on the Swing Plug-in purchase page.

AdMob plug-in products are also available in the free version of the app. You can purchase a paid app coupon after setting up the advertisement.

* Plug-in with AdMob is a single product, and after purchasing the product, you must purchase a swing paid app ticket and store upload ticket separately.

or

2) AdMob Power Package

You can also purchase the [AdMob Power Package] package.

*Manager → Online Stores → Swing2App Packages Please pay $580 for [AdMob Power Package].

The AdMob Power Package is a cheaper package product that combines ad-mob and voucher.

[Plug-ins with add-mob + Swing Basic Access (2 years/24 months)+ Upload Ticket 1 time each (App Store Upload Ticket, Play Store Upload Ticket)]

It’s all included.

So if you’re going to use the app for a long time, it’s much cheaper to buy a package.

*A discount of $245 is offered for individual purchases. $825→ $580

3. Create the ID required to subscribe to AdMob sites and set up ads

1)Please sign up for Google ad mob or log in if you have an account.

2)Add apps to create advertising unit IDs and check app IDs.

3) Please add all payment information so that it is not omitted.

To set ad-mob ads on the app, you need the information below.

(1) Full-page advertising unit ID (Android, iPhone)

(2) Banner ad advertising unit ID (Android, iPhone)

(3) Android App ID , iOS App ID

Please check the manual below for how to sign up for ad mobs, create advertising units, and check the app ID.

☞Go to see how to sign up for Google ad mobs and how to create advertising unit IDs

4. Set up ads in AdMob plug-in settings

After signing up for an ad-mob, if you’ve made all the advertising unit IDs, now I’m going to use the app! Let’s set up the ad.

Manager → Services → AdMob Plug-in Settings

1) Ad unit ID setting

-Enter Android Full Ad, Banner Ad ID

-Enter iPhone full-page ad, banner ad ID

-Android, enter iPhone app ID

2) Setting up a pattern of ad exposure

Please check both front and banner ads with ‘Use’ exposure.

*Front and banner ads are optional. You don’t have to expose both.

You can selectively apply it by exposing only the banner or just the front.

Banner ads can be completed by checking for ‘use’ exposure.

You can choose an exposure pattern for a full-page advertisement.

*Front ad exposure settings

1)Exposure of advertisements when launching the app for the first time

->Full advertisements are exposed when the app is first launched.

2) When switching to the app for the first time is in progress.

->After launching the app, a pop-up advertisement will appear once the screen is switched by selecting the first menu or page.

3)Exposure of advertisements by number of screen transitions

->You can set the number of ad exposures that appear as the screen transitions.

When setting to ‘Example’5’, full-page advertisements are exposed when the screen is switched 5 times.

4) Expose advertisements every scheduled time

->If you set a schedule time, the full-page advertisement will be exposed after that time.

Example) If you set it up for 60 seconds, the advertisement will be exposed 60 seconds after the app is launched. (Expose ad every 60 seconds)

*Important*

Please be careful when setting up a full-page advertisement!

Too many ads can increase the inconvenience of app users, leading to ad-spam reporting.

If you receive a report, you can block the app ad from Google or delete the AdMob account itself if it is too much.

Therefore, please manage the advertisement exposure properly so that there are no policy problems.

It’s better not to set up advertisement exposure by screen number of times and advertisement exposure by schedule time.

If you set it up together, please set the number of times or exposure time for a long.

*Please note that Swing to App will not solve the problem if the advertisement is suspended due to a violation of advertising policy.

You can check the full-page advertisement pattern setting and set it in the form you want.

You’re free to modify it at any time! Please re-produce the app only during the first setting.

After that, you just need to modify it and save it. If you exit and re-run the app, it will be reflected in the changed advertising settings.

5. App Creation Request (App Update)

After completing the ad-mob plug-in setup, please re-produce the app in a new version by clicking the [App Production Request] button on the app production page.

Please check ‘Don’t show updates’ for the update display option.

→ Displaying updates is meaningless because you need to install a new app.

Or, for apps that have existing apps on the Play Store and so on, if you show updates, they’ll be available to users before testing.

Therefore, it is not allowed to produce ‘Do not display updates’ so that only the administrator can use them.

You have to update the app to apply the advertisement setting.

You need to make an app only when you set up the first app advertisement.

If you make any further modifications, just save it and it will be reflected in the app. (If you re-run after the app is closed, it will be reflected in the changed advertising settings.)

6. Set ad app production completed (app test)

Please install the new version of the app on your Android phone to see if the advertisement is working properly. (Test only on Android phones)

Download and check the app you created on Swing to App Official App – [App Preview].

Check GIFs) See how to download apps

Check if the advertisement is working well after launching the app!

7. Registering the Store

You can download the app from above, test it, and then launch the app officially in the store if the ad pops up well.

– If you purchased an ad-mob power package, you can upload it right away because both your pass and upload ticket have already been applied.

– If you have purchased only AdMob plug-in products, please purchase a paid app pass and upload ticket together.

(App Store Upload Ticket $20 / Play Store Upload Ticket $5)

*If you can register the Play Store yourself, you don’t have to purchase upload tickets, please upload them yourself.

*App Store is only available on behalf of you, so if you want to upload the app store, please purchase a ticket and apply for upload.

Please refer to the below for instructions on how to apply for upload.

*Manager → Manage Version → Go to Production History menu and select the Play Store Upload or App Store Upload button in the market registration box.

The application pop-up will be displayed, and you will need to fill out the application form and apply for the upload to be delivered to Swing2App.

*Please apply for upload after payment.

☞[How to apply for a Play Store upload]

☞[How to apply for a App Store upload]

If you apply for upload of Play Store and App Store, we will upload your app on your behalf.

You must check the policies for each store.

*Store registration policy:  https://support.swing2app.com/market-policy/

Advice on operation of AdMob (user confirmation)

1) Only one ad-mob account per person can be used.

The same person cannot run multiple accounts, and if there is a duplicate account, the account created will be suspended.
So please make sure you have a previous account before joining the ad-mob.
If you accidentally created a duplicate account, you should request the account to be closed.
If you have a duplicate account, the advertisement will not be posted, and even if you request the cancellation of the duplicate account, it may take a long time for the account to be restored.

2) AdMob ads must be checked and managed by the operator.

If you created an advertising unit ID by adding an app for the first time, you should check if there are any unsupervised or blocked ads in the advertising management.
You need to check it from time to time, not just from the beginning.
If there is an unreviewed advertisement, the advertisement does not appear on the user’s phone, so the operator should always check it and change it to a review advertisement.
If you don’t manage your ads properly, the ads can suddenly go down or stop posting even if the ads are posted well at first.

3) Please be aware of invalid traffic and negative clicks!

Invalid traffic and negative clicks are when a user continues to artificially click an ad.
Advertisements run from the moment they are set up in the app.
If an ad touch is found on a particular model (phone), Google will drop the ad without notice.
Not only the operator, but also the users of the app choose to advertise artificially.
If there is any suspicious behavior, the advertisement may be suspended due to invalid traffic.
=The only way to wait for an ad to be re-published by Google is to wait for it to be re-published if the ad has gone down with invalid traffic.

4) App ad publishing may be interrupted if traffic is low.

Just by setting up an ad mob on the app, you don’t get the advertising revenue right away.
Google is sending out ads to see if the app is reliable.
If the operator’s app installation is poor or the users’ use of the app is poor, the app is judged to be unreliable and the advertisement is stopped.
Therefore, it’s not just about creating an app and setting up an ad mob, but it’s about time to continue marketing activities such as promoting the app so that more users can use it.

5) Make sure to register the payment profile on the ad-mob.

If the payment information is not registered in the ad mob, the advertisement will not be posted.
Google opens the advertisement only when the payment profile is confirmed, so please complete the registration of payment information when you sign up.
= If you apply without entering payment information, the AdMob advertisement will be delayed that much.
*After setting up the ad mob, you have to manage all of the ads yourself, so you must check and check the operation parts.

 Precautions

1) Information related to operation of ad mob, such as advertising revenue, operation methods, and policies related to ad mob, is not provided by Swing2App.

Please check the content and precautions on the official website of Google’s ad mob before applying.

*Swing to app only sets ad-mob ads on the app, so we don’t give advice on how to run an ad-mob.

2) If you have any questions regarding the application of ad mob to the app, please contact the customer service center before proceeding.

3) Once the ad-mob plug-in setting is completed after payment, we cannot refund the details of the ad-mob suspension or payment, so please consider it carefully before proceeding.

4)Advertisements cannot be selected by the user and will be displayed randomly on Google.

5)Advertisement setting – Full-page ad and banner ad, and full-page advertisement can be set up by the user.

6)Advertisement setting will be carried out with Android+iPhone integration, but it can also be applied as an Android or iPhone platform.

(Applying only one platform, the price of the admob is the same.)

7) The Swing to App does not sign up for an ad mob or create an advertising unit ID.

Please check the manual and register it yourself.

8)Don’t push an ad with a person on an app with an ad mob. Google will advertise when the artificial number of times increases.

9) Apps with ad mobs must be released in Play Store and App Store to generate app ad revenue.

Please make sure to launch the app on the store after applying the ad mob.

10) Ad mobs do not immediately generate advertising revenue just because they are installed in the app.

There are many conditions, and we need to get publicity and users to install many apps.

-A certain percentage of apps must be installed, and a certain amount of money must be earned to get a settlement.

-App ads can be lowered if the app is installed and used poorly, and Google can restrict the advertisement. (traffic low, etc.)

-So you should be familiar with the content on the official ad-mob site.

Refund guidance

1) Refund is possible when applying within 3 days of purchase, but if the ad mob setting is completed, no refund is possible.
2) You can apply the product before requesting a refund. If it is inevitable, please contact the customer service center.
3) If the card is not automatically refunded, we will deposit the refund amount. Please let me know your account number, bank name, and deposit address.
4) Please check the swing refund policy.
[Use policy-Checking refund regulations]  https://support.swing2app.com/help/user-protocol/

How to Use the AdMob Plug-in Settings

1. What is AdMob plugin settings?

After purchasing an AdMob plug-in product, you can set the ad-mob advertisement directly in the user’s app.
Previously, it was done by applying to Swing2App.
Users can now insert their own ad IDs and freely set up and use their ad exposure patterns.

2. Advantages of the AdMob plugin setting function!

1) You can expose/display front ads in any form at any time.

Exposing the first time you run the app? Expose when switching app screens? Expose at a set time?
=> The administrator can easily modify it any time. You can also expect advertising revenue accordingly.

2) If you need to change your ad ID, you can change it easily anytime.

3) If the advertisement needs to be stopped for a while, it will be reflected directly in the app if the exposure is only ‘not used’.

4) Users who run multiple advertised apps can manage them more easily from the AdMob plug-in settings page.

For each app, it is easier to check how the ad ID is and how the exposure pattern is set within the swing-to-app site without having to go into the official ad-mob site.

3. How to Use the AdMob Plug-in Settings

Go to Manager → Services → AdMob Plugin Settings.

*Only available to users who are using the AdMob service. You must purchase an AdMob plug-in to open that page!

1) Ad unit ID setting

–Android interstitial advertisement, banner advertisement ID input

–iPhone interstitial advertisement, banner advertisement ID input

-Android, iPhone app ID input

Please check the posting below to make AdMob sign-up, make ad unit, and check the app ID.

☞Go to see how to sign up for Google AdMob and how to create an ad unit ID.

2) Ad exposure pattern setting

Please check both front and banner ads with ‘Used’ exposure.

*Front and banner ads are optional. You don’t have to expose both.
You can selectively apply it by exposing only the banner or just the front.

Banner ads can be completed by checking for ‘used’ exposure.
You can choose an exposure pattern for a full-page advertisement.

​

*Front ad exposure settings

1) Exposure of advertisements when launching the app for the first time
->Full advertisements are exposed when the app is first launched.

2) When switching to the app for the first time is in progress.
->After launching the app, a pop-up advertisement will appear once the screen is switched by selecting the first menu or page.

3)Exposure of advertisements by number of screen transitions
->You can set the number of ad exposures that appear as the screen transitions.
When setting to ‘Example’5’, full-page advertisements are exposed when the screen is switched 5 times.

4) Expose advertisements every scheduled time
->If you set a schedule time, the full-page advertisement will be exposed after that time.
Example) If you set it up for 60 seconds, the advertisement will be exposed 60 seconds after the app is launched. (Expose ad every 60 seconds)

​

*Can’t banner ads be exposed like full-page ads?

Banner ads are attached to the bottom of the app screen, so they are constantly exposed.
Therefore, you do not need to set the exposure.

*Important*

Please be careful when setting up a full-page advertisement!
Too many ads can increase the inconvenience of app users, leading to ad-spam reporting.
If you receive a report, you can block the app ad from Google or delete the AdMob account itself if it is too much.
Therefore, please manage the advertisement exposure properly so that there are no policy problems.
Ad exposure by screen number of times + advertisement exposure every certain time is not recommended.
If you set it up together, please set the number of times or exposure time for a long.
*Please note that Swing to App will not solve the problem if the advertisement is suspended due to a violation of advertising policy.

How to set advertisements can be checked in detail by viewing the manual below.

☞ Go to see how to set up AdMob plugin advertisement

Check the GIF) Let’s check if the advertisement is well displayed!

We used banner ad exposure to the app’s advertisement setting.
Front advertisement is set to -> App on initial launch + App on screen 1 times.
So, as you can see, when you launch the app for the first time, you can see a full-page advertisement.
The full-page advertisement pops up when the screen changes 1 times by selecting the post.
It’s so easy to download the app and see if the set ad works well~!^^

4. Guidelines

1) Only those who use the ad mob service after purchasing the AdMob plug-in will see the page.
Existing ad mob users are also available.

2) Those who register for the first time and modify the advertisement for the first time should update the app to a new version after saving it.

3) Please check the existing users of the AdMob.
If you modified the ad exposure pattern in the AdMob plug-in settings, please re-create the app.
**First! Please re-create the app only in edit. After the first modification, you only need to save the next modification.
-> If it’s on the Play Store or App Store, you need to update it to the newly created app with the modified ad settings.

4) Please check with new users who are planning to use it after the update
New users don’t have to leave their applications on Swing2App after purchasing an ad-mob plug-in product.
You can use the ad-mob plug-in setting screen after setting up the advertisement.
*After applying ad-mob advertisement, click [App Creation Request] on the app production page and update it to the new version.
You need to create a new app for the ad to take effect, and you can check the ad and release it in the App Store and Play Store.
You just need to save it when you edit the advertisement later.

5)You can check the front advertisement pattern setting and set it in the form you want.
You’re free to modify it at any time! Please re-produce the app only during the first setting.
After that, you just need to modify it and save it. If you exit and re-run the app, it will be reflected in the changed advertising settings.

6)Please take care of it so that it doesn’t become a problem.
You can edit your own exposure, so you can be greedy and expose too much.
But if the ads appear too often, the app user can report them to Google.
If you receive a report, you can block the app ad from Google or delete the AdMob account itself if it is too much.
Therefore, please manage the advertisement exposure properly so that there are no policy problems.

*Please note that Swing2App will not solve the problem if the advertisement is suspended due to a violation of advertising policy.​

AdMob Operations – Adding payment information, checking un-reviewed and blocked ads

After applying for Admob Operation, you should be familiar with how to operate Admob ads.

1) Enter your payment information

If your admob payment information is missing, your ads won’t be displayed.

2) Manage un-reviewed and blocked ads

If the ad is not reviewed, it will not be displayed in the app. If you see any un-reviewed ads, you should check and change them to review.

1. Enter Payment Information

After logging in to the admob, if you look at the main dashboard, can you see the missing payment information?

There is a message stating that your payment information is missing. *If your payment information is missing, please make sure to add it or your ad won’t be displayed.

Please enter the [Add payment information] menu.

The payment information entry page will add your payment profile.

Account Type (Personal or Business Choice) Complete Address, postcode, name, and phone number.

Once you’ve completed your payment profile entry, go back to the main dashboard, and you’ll see that your status has changed to [Account Approved].

Your account information has been verified so your ads will be displayed.

*Admob can enter the method of receiving payment when the standard revenue provided by Admob is not entered when entering the account information.

Therefore, you will not enter an account, bank, etc on which you want to receive revenue.

2. Block management – manage app ads

Once you’ve entered your payment information, make sure there’s no un-reviewed ads are in Block Management so that your ads can be published.

AdMob-How to set your banner ad frequency

When applying Google AdMob ads – banner ads are automatically displayed and entered.

1. Access to Google AdMob site

Let’s edit the banner ad frequency-time from the ad unit ID you created.

https://apps.admob.com/

Please go into the site and log in with your AdMob account.

App already in use – Since you already have an ad ID, select [App] in the left sidebar, and then select the app whose ad you want to change.

*If you apply ads to both Android and iPhone platforms, you need to change them all, so please set them one by one.

2. Ad Units

If you go to the app (for Android), you’ll have an ad unit in the left sidebar. 

Please select [ad unit].

Please select [banner] on the ad unit page. 

3. Edit Ad Unit

Go to the edit ad unit page. *I’m already using an ad unit, so I’ll edit it and use it.

1)Select Advanced setting

2) Select Auto-refresh

3)Select the pencil icon (create).

★Automatic refresh will create a new ad request, as shown in the help above, and tell you how often new ads are displayed to you.

Therefore, to set the frequency, you can edit it in the auto-refresh.

You can enter the refresh rate by selecting [Custom] in Auto Refresh.

*Refresh frequency time is 30 – 150 seconds. Please enter the correct time. 

After entering, press the [Save] button to complete, and the app will reflect the banner ad frequency time to the changed time.

If you are also working on an iPhone ad, then follow the same steps as you have edit your Android phone ad unit.

5. When registering a new ad unit

The same method is used to create a new ad unit IDs.

After adding a banner ad format, select [Advanced settings] → Auto-refresh  → [Custom] in the ad unit settings configuration and enter the frequency of impressions  → Select the Create ad unit button.

Please proceed in that way. 

*Those who created the app with Swing2App can not put ads directly into the app.

If you ask us, we will apply only for the setting cost.

Please refer to the manual for how to sign up for AdMob and create an ad unit.

☞ Sign up for AdMob service

☞ How to apply for AdMob Plug-In

★ Information

Banner ads are changing to new ads based on frequency. 

Occasionally, we ask you to change your banner ad every time you select an app page or post.

Apps are not installed in that way. 

Please note that this is in violation of google’s policies, so if you edit the ad display format, your ads may be deleted or your AdMob account may be deleted.

And as mentioned above banner ad impression frequency is best set to the automatic setting (auto refresh)-Google optimization.

The guide to ad exposure time is useful for those who have just released an app.

If you’re running your app to a certain extent, please use it with automatic settings (auto-refresh).

I hope this helps.

How to sign up for AdMob and how to create an AdMob Ad Unit ID

 What is Google AdMob?

AdMob is an advertising platform provided by Google that allows you to place ads in your app.

You can monetize your ads by applying the ad platform to your app.

How do I apply AdMob to my app?

In the ad mob plug-in settings provided by Swing to App, the app operator can set up the advertisement with the app that I created.
*AdMob setting is available only when you purchase an AdMob Plug-in product or AdMob Power Package.

 What should the user do?

1)Please subscribe to the Google ad-mob official website. (Login in if you have an account)

2) After adding an app to apply the advertisement, create an advertising unit ID.(BANNER+Front)

3) Please enter the ad-mob payment information (it is listed on the ad-mob dashboard, and if it is not written, post an ad X)

4)Advertisement management checks if there are any unreviewed or blocked advertisements.

5)If you’re done making it, you can save it by entering the advertising unit ID, app ID, and ad exposure pattern created in the ad mob plug-in settings.

If you re-produce the app and check the updated version again, you can check the screen with the advertisement.

You can check the ad-mob plug-in setting advertisement setting in detail in the manual below.

☞ Go to see how to set AdMob plug-in ads

Why create an ad unit ID?

To add ads to your app, you need the app’s unique ad unit ID.

There is a unique ID that applies to Android phones and iPhones.

There are also IDs depending on the type of advertisement.

This allows users to create their ad unit IDs and apply them to the app to make their ads look normal.

+Android banner, front ad ID

+iPhone banner, front ad ID

+Android App ID,  iPhone App ID

Find out how to sign up on the Google AdMob site and how to create an app ad unit ID.

STEP.1 Sign up for AdMob

1. Go to the AdMob site https://admob.google.com/home/ and select the [Sign up] button.

2. Enter your Google email address and password and select the Next button.

3. Enter the information required for your account after signing up.

STEP.2 Subscription completed. Get started with AdMob

https://apps.admob.com/

STEP.3 Set up a new app

Press the Start button and you’ll see a new app settings page.

At this point, you will be asked if you have published (launched) the app to the Google Play Store and App Store.

–If you are a user here, and if your app is released to the store! Check “Yes”

-If you just created it and haven’t released it yet, please check “No”.

As explained above, we will show you how to create an ad unit by checking ‘No’.
If your app hasn’t been released to the Store yet, please select ‘No’.

1)Enter the name of the app: the name of the app you created, and the name you’re releasing in the Store.

2)Please choose the platform: Android and iPhone can be applied to both, so if you want to release together, please make your order.

3)Select the [Add] button.

4)Select the [Next step: Create an ad unit] button.

Ad mob can have 2 kinds of the banner and front side.

Therefore, you can create an ad unit for both banner and front.

If you select the Create Ad Unit button, the unit ID is created.

There’s nothing difficult to do.

Select the banner and the front side in order.

First, let’s choose a banner and make it.

1) Select your banner ad

2) Enter the ad unit name: It’s only for you to check, so you can easily enter it.

3) Select the Create Ad Unit button.

STEP.5 Check your ad units

Once you’ve created your ad unit ID, you can check it on the admin page.

You can select the ad unit ID you created by selecting [Ad unit] from the left menu of the AdMob management page. 

Copy app ID

If you have created an ID, please check and copy the App ID – Android App ID, iOS App ID

Where can I check the Android App ID and iOS App ID?

Select the app you added from the dashboard → Select the category on the left → View the app ID by selecting the App Settings tab.

If you press the copy button next to the ID, you can copy the ID. Please paste the ID when you leave an ad-mob request.

Android and iPhone app IDs will be created, so please check each app ID and paste the ID on the ad mob plug-in setup screen.


You can check the ad-mob plug-in setting advertisement setting in detail if you look at the post below.

☞ Go to see how to set ad-mob plug-in ads

STEP.6 Operation of AdMob’s

If you created an ad Unit ID after signing up for AdMob, we will tell you what to do next.

Please check as it is important!

If you apply AdMob ads, you can check the operating status of payment information and other information through the AdMob management page in the future.

You can manage it on this page.

01. Enter payment information

If you look at the main dashboard, can you see the missing payment information?

There is a message stating that your payment information is missing. *If your payment information is missing, please add it as your ad won’t show.

Please enter the [Add payment information] menu.

Once you’ve completed your payment profile entry, go back to the main dashboard, and you’ll see that your status has changed to [Account Approved].

Your account information has been verified, so your ads can run.

*Admob can enter the method of receiving payment when the standard revenue provided by Admob is not entered when entering the account information.

As a result, you won’t enter the account, bank, etc., on which you want to receive revenue.

2) Blocked ads

Even if you don’t have un-reviewed ads in the first place, if you have blocked ads, they won’t be published.

So, select the [Blocked] menu to see if any of the ads that have been applied to your app are blocked.

If no ads are blocked, they will appear like the image above, but if there are ads that are blocked, they will appear together on the screen.

You should check it out and review it before removing the blocked ads.